GD26

Print

The primary purpose in the design of the model ‘GD26’, described below, is to provide a machine to form a wide range of trays. ‘GD26’ synthesizes thirty-years experience of Mr. Gazzani with ten-years commercial path of S.M.I., balancing the whole experience of our staff. The standard version of ‘GD26’ can form “PLAFORM®” and “CITRUS” models with upper bridges, with or without weight-bearing prismatic corners. Through simple optional devices, designed by S.M.I. following the evolution of the blanks, the machine can also form models “P84®”, with internal and curled corners, with “L” corners and models with fold over long sides and short sides.
The prerogatives of this machine are very small overall dimensions, very high output rate and rapidity of size changeover.
The machines are supplied with user manual and maintenance booklet for spare parts.

 

FRAME AND PANEL
Welded iron frame with anti-rust treatment and colour RAL7016 finishing; carters colour RAL7035
FEEDER
Horizontal, placed above the slide rails
SECURITY PROTECTIONS
Plexiglas inspection carters fitted with security stop switches
BLANKS DIMENSIONS
Min 320x420 mm / Max 1000x1320 mm
TRAY DIMENSIONS
Min 200x300x60 mm / Max 600x600x250 mm
OUTPUT RATE
Up to 40 pcs per minute, depending on the size
PLC
Omron Model
FUNCTION CONTROL PANEL
Panasonic touch-screen model
FUNCTIONING
Mechanical, electric and pneumatic
INSTALLED POWER
7 KW / 400V / 50Hz + GND + N / Voltage 24V
COMPRESSED AIR CONSUMPTION
41,29 Nl per box at 6 bar
GLUE SYSTEM
Robatech – Meler – Nordson - Melton
PNEUMATIC SYSTEM
Norgren
INCLUDED FORMATS
One
WEIGHT
1800 Kg
SIZE CHANGING
Crank size changing with position gauge
LAYOUT N°
See attached drawing