The primary purpose in the design of the model ‘GD26’, described below, is to provide a machine to form a wide range of trays. ‘GD26’ synthesizes thirty-years experience of Mr. Gazzani with ten-years commercial path of S.M.I., balancing the whole experience of our staff. The standard version of ‘GD26’ can form “PLAFORM®” and “CITRUS” models with upper bridges, with or without weight-bearing prismatic corners. Through simple optional devices, designed by S.M.I. following the evolution of the blanks, the machine can also form models “P84®”, with internal and curled corners, with “L” corners and models with fold over long sides and short sides.
The prerogatives of this machine are very small overall dimensions, very high output rate and rapidity of size changeover.
The machines are supplied with user manual and maintenance booklet for spare parts.
FRAME AND PANEL
|
Welded iron frame with anti-rust treatment and colour RAL7016 finishing; carters colour RAL7035
|
FEEDER
|
Horizontal, placed above the slide rails
|
SECURITY PROTECTIONS
|
Plexiglas inspection carters fitted with security stop switches
|
BLANKS DIMENSIONS
|
Min 320x420 mm / Max 1000x1320 mm
|
TRAY DIMENSIONS
|
Min 200x300x60 mm / Max 600x600x250 mm
|
OUTPUT RATE
|
Up to 40 pcs per minute, depending on the size
|
PLC
|
Omron Model
|
FUNCTION CONTROL PANEL
|
Panasonic touch-screen model
|
FUNCTIONING
|
Mechanical, electric and pneumatic
|
INSTALLED POWER
|
7 KW / 400V / 50Hz + GND + N / Voltage 24V
|
COMPRESSED AIR CONSUMPTION
|
41,29 Nl per box at 6 bar
|
GLUE SYSTEM
|
Robatech – Meler – Nordson - Melton
|
PNEUMATIC SYSTEM
|
Norgren
|
INCLUDED FORMATS
|
One
|
WEIGHT
|
1800 Kg
|
SIZE CHANGING
|
Crank size changing with position gauge
|
LAYOUT N°
|
See attached drawing
|
|